Canon G2010 Resetter May 2026

A: Only if the physical pad is already full. Reset then monitor for leaks.

The error doesn’t always mean the pad is physically full. Canon sets a conservative counter. However, if you’ve printed thousands of pages, the pad may actually be saturated. ⚠️ Warning: Resetting the counter without cleaning or replacing the physical ink absorber can lead to ink leaking inside your printer, potentially damaging it permanently. What is a Canon G2010 Resetter? A resetter is a small software tool (usually for Windows) that resets the printer’s internal waste ink counter back to zero. It does not physically clean or replace the ink pads — it only tells the printer that the counter is empty again. canon g2010 resetter

A: Typically 2–3 times before the physical pad must be replaced. After that, ink will leak. Final Verdict The Canon G2010 resetter is a lifesaver for getting your printer working again after a false “ink absorber full” error. Use it carefully, always scan the tool for viruses, and don’t ignore the physical maintenance. A: Only if the physical pad is already full

After resetting, your printer will work normally, but you should eventually service the absorber. This is the trickiest part. Many resetter downloads online contain malware, viruses, or are simply fake. Canon sets a conservative counter

| If your printer... | Action | |-------------------|--------| | Is < 2 years old, light use | Reset only – pad is likely fine. | | Is > 2 years old, heavy use | Open printer and replace/clean absorber pads (or install an external waste ink tank). | | Leaks ink after reset | Immediately stop using, clean internal pads, or take to a repair shop. |